2004 Refereed Journal and Conference Publications

 

Glen Besterfield

  1. A.K. Kaw, G.H. Besterfield and S. Nichani, “Integrating a Research Problem in a Course in Applied Elasticity,” International Journal of Mechanical Engineering Education, pp. 232-242, Vol. 32 (3), 2004.

 

Rajiv Dubey

  1. W. Yu, R. Dubey, N. Pernalete, “Eye-Hand Coordination Assessment Using a Robotic Haptic Interface”. Proceedings of the 2004 IEEE International Conference on Robotics and Automation (ICRA 2004). Vol. 1, pp. 305- 310, 26 April-1 May, 2004, New Orleans, LA, USA.
  2. N. Pernalete, R. Gottipati, S. Mikkilineni, E. McCann, W. Yu, R.V. Dubey, “First Step on the Driving Simulator for Persons with Disabilities”. Proceedings of the 2004 IEEE International Conference on Robotics and Automation (ICRA 2004)  Vol.1, pp. 305- 310, 26 April -1 May, 2004, New Orleans, LA, USA.
  3. W. Yu, R. Dubey, N. Pernalete, “Robotic Therapy for Persons with Disabilities Using Hidden Markov Model Based Skill Learning”. Proceedings of the 2004 IEEE International Conference on Robotics and Automation (ICRA 2004) Vol. 2, pp. 2047-2079, 26 April-1 May, 2004, New Orleans, LA, USA.
  4. E. McCaffrey, R. Alqasemi, R. Dubey, “Wheelchair Mounted Robotic Arms: Kinematic Analysis and Evaluation”. Proceedings of the 2004 IASTED International Conference on Robotics and Applications (IASTED-RA 2004). pp. 28-33, 23-25 August, 2004, Honolulu, HI, USA.
  5. W. Yu, R. Dubey, N. Pernalete, “Telemanipulation Enhancement Through User’s Motion Intention Recognition and Fixture Assistance”. Proceedings of the 2004 IEEE/RSJ International Conference on Intelligent Robots and System (IROS 2004). Vol. 3, pp. 2235- 2240, 28 September-2 October  2, 2004, Sendai, Japan.
  6. E. McCaffrey, R. Alqasemi, R. Dubey, “Kinematic Analysis and Evaluation of Wheelchair Mounted Robotic Arms”. Proceedings of the 2004 ASME International Mechanical Engineering Congress and Exposition (IMECE 2004). 13-19 November, 2004, Anaheim, CA, USA

 

Daniel Hess

  1. S. Mudhivarthi and D.P. Hess, “Wear Data from Friction Pairs for Microscale Piezoelectric Actuators,” Tribotest Journal, Vol. 11, 2004, pp. 3-10.
  2. N.G. Pai and D.P. Hess, “Dynamic Loosening of Threaded Fasteners,” Noise and Vibration Worldwide, Vol. 35, 2004, pp. 13-19.

 

Autar Kaw

  1. A.K. Kaw, G.H. Besterfield and S. Nichani, “Integrating a Research Problem in a Course in Applied Elasticity,” International Journal of Mechanical Engineering Education, pp. 232-242, Vol 32 (3), 2004.
  2. N. Collier, A.K. Kaw, “On Comparing Computational Systems – Maple, Mathcad, Matlab, and Mathematica,” ASEE Computers in Education Journal, pp. 12-24, Vol. XIV (1), (2004).
  3. A.K, Kaw and G.H. Besterfield, “Novel Web-Based Resources for Numerical Methods,” ASME International Mechanical Engineering Congress and Exposition, Nov 14-18, 2004, Anaheim, CA.

 

Ashok Kumar

  1. P. B. Zantye, A. Kumar, A. K. Sikder, “Chemical Mechanical Planarization for Microelectronics Applications” Materials Science and Engineering R, Vol. 45/3-6,  pp 89-220 (2004)
  2. S. Thagella, A. K. Sikder, and A. Kumar, “Tribological Issues and Modeling of Removal Rate of Low-k Films in Chemical Mechanical Planarization, The Journal of the Electrochemical Society, Vol. 151, No. 3, G205-G215 (2004)
  3. K. Sikder, S. Thagella, A. Kumar, and J. Yota, “Effects of Growth Parameters and Properties of Doped and Undoped Silicon Oxide Films on Wear Behavior During Chemical Mechanical Planarization Process”, Journal of Material Research, Vol. 19, No. 4, 996 (2004)
  4. P.B. Zantye, S. Mudhivarthi, A. K. Sikder, A. Kumar, and Y. Obeng, “Metrology of Psiloquest Application Specific Pads (ASP) for CMP Applications, Material Research Society Symposium, Pro.  Vol. 816, K5.6.1-K5.6.6 (2004)
  5. P. Shukla, A. K. Sikder, P. B. Zantye, A. Kumar, and M. Sangnaria, “Effects of Annealing on the Structural, Mechanical and Tribological Properties of Electroplated Cu Thin Films, Material Research Society Symposium, Pro. Vol. 812, F3.16.1-F3.16.7 (2004)
  6. S. Zekri, L. Clayton, E. Ferguson, G. Okogbaa, A. Kumar, T. Das, G. Centeno, L. Martin-Vega, “An Impact Study of the Implementation of a Materials Science and Engineering Module at the Fifth Grade Level”, Material Research Society Symposium, Proceeding Vol. 827E,  MRS Spring Meeting (2004)

 

Yvonne Moussy

  1. Y. Moussy, “Visualization of concentration polarization of a blood protein using fluorescent nanocrystals,” Bulletin. 49(7):23-24, 2004.

 

Muhammad Rahman

  1. M.M. Rahman and L. Rosario, “Thermodynamic Analysis of Magnetic Refrigerators,” Proc. 2004 ASME International Mechanical Engineering Congress and Exposition, Vol. 3, Anaheim, California, November 2004.
  2. S.H. Ho, L. Rosario, and M.M. Rahman, “Prediction of Relative Humidity and Temperature in an Operating Room,” Proc. 2004 ASME International Mechanical Engineering Congress and Exposition, Vol. 1, Anaheim, California, November 2004.
  3. P.S.C. Rao and M.M. Rahman, “Analysis of Steady State Conjugate Heat Transfer in a Circular Microtube Inside a Substrate,” Proc. 2004 ASME International Mechanical Engineering Congress and Exposition, Vol. 1, Anaheim, California, November 2004.
  4. A.J. Bula and M.M. Rahman, “Transient Thermal Management of Microelectronics Using Free Liquid Jet Impingement,” Proc. 2004 ASME International Mechanical Engineering Congress and Exposition, Vol. 3, Anaheim, California, November 2004.
  5. M.M. Rahman, R. Mead, C.T. Hong, L. Lin, and R. Ponnappan, “Numerical Analysis of Spray Nozzle for Predicting Spray Cone Angle and Pressure Drop,” Proc. AIAA Second International Energy Conversion Engineering Conference, Providence, Rhode Island, August 2004.
  6. M.M. Rahman and A.A. Gari “Conjugate Heat Transfer Analysis for Fin Filled with Liquid Metal,” Proc. AIAA Second International Energy Conversion Engineering Conference, Providence, Rhode Island, August 2004.
  7. S.K. Mukka and M.M. Rahman, “Computation of Fluid Circulation in a Cryogenic Storage Vessel,” Proc. AIAA Second International Energy Conversion Engineering Conference, Providence, Rhode Island, August 2004.
  8. B. Krakow, M.M. Rahman, P. Chennapragada, S. Lakkakula, R. Mead, E.K. Stefanakos, and G. Moore, “Development of an Innovative and Low Cost Hydrogen Liquefaction System Using Metal Hydrides and Low Grade Heat,” Proc. NHA 15th Annual U.S. Hydrogen Conference, Los Angeles, California, April 2004.
  9. S.S. Shevade and M.M. Rahman, “Transient Analysis of Microchannel Heat Transfer with Volumetric Heat Generation in the Substrate,” Proc. TMS Annual Symposium, Charlotte, North Carolina, March 2004.
  10. S.K. Mukka and M.M. Rahman, “Analysis of Fluid Flow and Heat Transfer in a Liquid Hydrogen Storage Vessel for Space Applications,” Proc. Space Technology and Applications International Forum (STAIF-2004), Albuquerque, New Mexico, February 2004.

 

Alex Volinsky

  1. S. Zollner, R. Liu, A.A. Volinsky, B.-Y. Nguyen, C.S. Cook, Gate Oxide Metrology and Silicon Piezooptics, Thin Solid Films, 455-456, pp. 261-265, 2004.
  2. A.A. Volinsky, L. Rice, W. Qin, N.D. Theodore, FIB Failure Analysis of Memory Arrays, Microelectronic Engineering, Vol. 71/1, pp. 3-11, 2004.
  3. D.C. Meyer, T. Leisegang, A.A. Levin, P. Paufler, A.A. Volinsky,  Tensile Crack Patterns in Mo/Si Multilayers on Si Substrates Under High-temperature Bending,  Applied Physics A, 78, pp. 303-305, 2004.
  4. A.A. Volinsky, N.R. Moody, W.W. Gerberich, Nanoindentation of Au and Pt/Cu Thin Films at Elevated Temperatures, Journal of Materials Research, Vol. 18, No. 9, pp. 2650-2657, 2004.
  5. A.A. Volinsky, P. Waters, G. Wright, Micro-fluidics Applications of Telephone Cord Delamination Blisters, Mat. Res. Soc. Symp. Proc. Vol. 855E, W3.16, 2004.
  6. A.A. Volinsky, P. Waters, J.D. Kiely, E. Johns, Sub-Critical Telephone Cord Delamination Propagation and Adhesion Measurements, Mat. Res. Soc. Symp. Proc. Vol. 854E, U9.5, 2004.
  7. A.A. Volinsky, V. Timoshenko, V. Nikolaenko, V. Morozov, Irradiated Single Crystals for High Temperature Measurements in Space Applications, Mat. Res. Soc. Symp. Proc. Vol. 851, NN1.4, 2004.